Quick Guide – EcoFlow Costco Next

How three different connections work

IOT
Direct Connection
Bluetooth

Your device will be internet-based when connected. With EcoFlow App, you can control the devices from anywhere.

Product Name	Bluetooth	Direct Connection
RIVER Pro	-
DELTA Max	-
DELTA Pro
Power Kits		-

Methods To Connect Devices

IOT
Direct Connection
Bluetooth

IOT Mode

In the IOT mode, the unit will be connected to the Internet after the network connection process is completed in the app. Once connected, no matter where you are, you can always use the EcoFlow app to monitor and control the unit in real time, as long as your mobile phone has Internet access.

You must complete the network connection process for the unit to enter the IOT mode. You can follow the steps below to complete the network connection process:

Connect New Device When Bluetooth is Detected

Step 1: Click the "Connect" button on "New Device Dialog" when a new device is detected via Bluetooth.

Step 2: On the Internet Setup page, select the WiFi name you're going to set up. Enter the correct password and tap "Continue".

Step 3: Wait for the setup process to complete, connection successful.

Note:

* After the unit is connected to the network, you can use your phone to control the unit over the mobile network. If the unit is connected to a Wi-Fi network that is not usable or has no Internet access, the unit will be offline and you will not be able to control the unit.

* Currently, the units only support 2.4GHz Wi-Fi.

Direct Connection Mode

In the Wi-Fi direct connection mode, your phone will be directly connected to the unit, so you can view and control the unit in real time without having to connect to the Internet. This mode is suitable for outdoor environments where there is no Wi-Fi network. Multiple users can connect to the unit and control the same unit at the same time.

You can follow the steps below to switch the unit into the Wi-Fi direct connection mode:

Step 1: Press and hold the "IOT RESET" button of the unit for 3 seconds and release the button when you hear a beep. The Wi-Fi icon on the unit's screen will start flashing.

Step 2: Go to the Wi-Fi settings on your phone and find the network starting with “EcoFlow”; Tap the network you found and connect to it.

Step 3: Go back to the EcoFlow App. You will see a pop-up window which will guide you to add the new device to the device list.

Step 3: Continue to IOT setup or set up later.

Note:

* In the direct connection mode, the Wi-Fi icon on the screen will keep flashing.

* In the direct connection mode, the phone is connected to a local Wi-Fi network that does not have Internet access.

* To ensure a stable connection, please put your phone as close to the unit as possible. If you want to switch to the IOT connection mode, please restart the unit.

* If the unit is in IOT connection, every time the unit restarts, it will enter the IOT mode. If you want to enter the direct connection mode, you will need to press and hold the IOT RESET button.

Extra Batteries

Solar Panels

Accessories

Smart Appliances

All Products

How three different connections work

Methods To Connect Devices

IOT Mode

Direct Connection Mode

Bluetooth Mode